Mitsubishi VL-50SR2-E Mechanical Ventilation Wall Fan

Mitsubishi VL-50SR2-E Mechanical Ventilation Fan

Mitsubishi VL-50SR2-E is the first mechanical heat recovery fan that uses a single pipe for the supply and return of fresh air. Its small size and refined design make it suitable for multiple residential applications. For rooms  up to 40 square meters, it is the perfect solution for living rooms and bedrooms.

Controlled Mechanical Ventilation Mitsubishi VL-50RS2-E With Wireless Control

• The heat recovery unit is ideal for the intake of fresh air and the expulsion of stale air complete with filter system and Lossnay total heat recovery unit.
• The new model is also equipped with an infrared remote control for switching the unit on and off.

Easy To Install (Horizontally or Vertically)

The new Lossnay VL-50SR2-E unit is designed to meet the needs of those small rooms where you do not want to give up the advantages and well-being associated with air exchange but which are unable to carry out costly and invasive installations.

The VL-50SR2-E is the first mechanical fan to use a single pipe (Ø120) for the extraction of stale air and the introduction of fresh air. In fact, it has a single duct divided by a septum in which both air flows flow: the one expelled towards the outside and the renewal towards the internal environment. 

This is a significant advantage as a second hole is not required during installation. Unlike the common products available on the market which, under the same installation conditions, work alternating flows, the VL-50SR2-E model allows simultaneous introduction of fresh air and extraction of stale air, with heat recovery.

The Mitsubishi VL-50SR2-E is in fact equipped with a Lossnay total heat recovery unit, which allows to reduce the thermal load associated with the fresh air thanks to the high efficiency thermal recovery, guaranteeing considerable energy savings.

The small size and refined design make it suitable for various types of residential applications, in common domestic environments and small rooms.

The Importance Of Good Air Exchange

The operating principle of mechanical ventilation for residential buildings is based on a double flow of air: a flow of exhausted air extracted from the internal environment and an incoming flow of fresh air.

The exhaust and renewal air flows pass through the recuperator in which, without any mixing of the two flows, the recovery of thermal energy takes place: thanks to the high efficiency of the cross-flow heat exchanger (up to 95%) the expelled air it only disperses pollutants and not energy.

The renewal air, in addition to being preheated / pre-cooled, is also effectively filtered, contrary to what happens when the windows are opened, thus guaranteeing renewal with truly healthy air.

Lossnay Heat  Recovery Unit – What Is It?

Heat recovery controlled mechanical ventilation units allow for continuous air exchange within the environment and at the same time recover heat (in winter) and coolness (in summer). The stale and humid air present inside the rooms is taken and renewed by new preheated or cooled air without any energy dispersion.

The exchange of air reduces the relative humidity in the rooms, improving the comfort of the occupants, prevents the formation of mold, eliminates unpleasant odors and restores the right oxygenation to the environment.

Mitsubishi VL-50RS2-E LG heat recovery units contribute to improving the quality of life inside buildings and achieving high energy savings by adapting to the different characteristics of the environments. 

The value for money is surprising!