My Cart


Concentrated Solar Power

  • Published in
  • Written by Super User
  • Category: Uncategorised
  • Hits: 949

Scalable concentrated solar power system with combined heat and power (CSP-CHP).

Hybrid system consists of a stirling-dish and a heat to electricity engine (stirling generator or microturbine). Preliminary calculations and simulations show that this high temperature cycle is capable of reaching temperatures higher than 800oC at the receiver and generate 14kW of electric power.

 The CSP-CHP aims at residential users and /or hotel units. Hence, the innovation of this design relies on smaller size mirrors (<16m2), higher reflectivity (>93%) and greater energy collection efficiency (>75%). In addition the ability for configurability and interoperability to work within wider temperature range providing end-users with maximal flexibility in using the sun light energy (for electric power generation, heating/cooling or water treatment).

Additional innovative aspect of the CSP-CHP lies in following of the “LEGO bricks” approach - easy and challenging to assembly pieces of equipment by the user himself. This approach enables wider application, reduction of the price for the whole system and improve attractiveness.



  • Published in
  • Written by Super User
  • Category: Uncategorised
  • Hits: 1055

Remoda !

New Monitoring Portal Dedicated for Cyprus matters

We are happy to announce collaboration with   portal where registered users can view, analyze and collect their data …Anytime… Anywhere!


The portal supports industrial and/or commercial remote process monitoring, control and data logging. 
Salient features are not limited to: 

    >   CUSTOM REPORTS (on per-case requirements) 
    >   SMS / EMAIL notifications (event- or timer-driven) 

Applications (View FAQ - in Greek ):


  • LIVE (€) electricity bills (quantitative comparison of EAC tariffs)
  • Energy Demand, Consumption & Quality Analyses (determination of customer profile)
  • PV Production, Yield & Performance Ratio
  • Remote Weather Stations
  • Industrial Processes & Productivity
  • Digital/Analogue sensors (temp, pressure, weight, flow etc.)
  • BMS, PLCs, SCADA etc...



Frequently Asked Questions

  • Published in
  • Written by Super User
  • Category: Uncategorised
  • Hits: 1397


Have a question and need an answer quickly? See the frequently asked questions below to learn more about Current Cost products 


A fairly easy mistake is to place the CT (Sensor jaw) around either more than one cable or a multi-core cable. The CT must be placed around one single mains cable, ideally the 4th from the left as you look at the meter. If you place it around both Live and Neutral, it will have a cancelling effect or possibly a very low reading that doesn't reflect the real figure.

The light only comes on when the low tariff is used and set. If you don't actually want a low rate tariff set-up: Press and hold the left hand triangle button for more than 3 seconds, toggle between options with the square button and note the rate. Press and hold both triangle buttons for more than 3 seconds, toggle between the options using the square button and set the low rate to the same value as the normal.

The monitor has been specifically designed to run off the mains power supply, so it's always on, ready to give you information at a glance. Using batteries has an environmental impact ... and of course they always need changing.

All stored information (time, unit cost, historic data) will be held in memory, although the clock will remain at the time when the power was removed.

No, but it makes good sense to place it where you can easily glance at it, perhaps the kitchen. The radio signal from the transmitter should cover a distance of 30 metres, but solid walls and obstructions can affect this.

You could do, but you may find it interesting to see the power you are using/wasting when the house is left unoccupied and theoretically when it should be using virtually nothing.

Depending on your unit cost ~ About 2.5p per week.

From time to time the display unit may temporarily lose its signal, this can be caused by a number of things but it should reconnect in a matter of seconds

All our monitors are available in Black or White. In addition the EnviR can compliment any room with our range of colourful changeable fascias.

Yes, in fact this makes great sense so you can keep an eye on energy usage more frequently.

No, the Current Cost device is not intrusive, this means that no electrical connection is made. However, it is good practice to follow the instructions issued by your utility company very carefully and if you are in any doubt consult a professional.

In the first instance you can email our Technical Team ~ This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

A slightly damp sponge or cloth, do not immerse in water.

We are continually making improvements and changes to our range, we hope to have an 'audible alert' version available soon.

The Current Cost monitor is equipped with a serial port for direct contact with your home or business PC. Software we are developing now will allow all sorts of communication. It is not good practice of course to leave your PC on (even in stand-by) while you are not using it.

 Yes, the Current Cost product will allow for up to three clamps, the total usage is displayed on the monitor, but can be viewed individually on a PC.

Software is being developed which will allow you to interrogate historic data, via your PC. You can view usage on the monitor for 1, 7 and 30 days.

 The standard European version has both £ (GBP) and € (Euro) symbols, and $ (dollar) versions are available on request.

Yes, the Current Cost monitor allows for two different day rates using a secondary clamp.

 Keep an eye on the monitor when different appliances turn on and off, check the consumption against the manufacturers specification, it may differ slightly and older machines are almost certain to use more. There will come a time when the appliance is using far more than it should and replacement should be considered.

The Current Cost system is specifically designed to highlight areas of usage (and more importantly wastage) it is not intended to replace or compete with your more accurate installed meter. It can complement your installed system by showing you what appliances are costing money now or recently, whereas your meter will show you accumulated usage. The Current Cost system receives information every six seconds, your meter continually records usage.

To buy any Current Cost energy monitor or accessories visit our shop here.

The RJ45 to USB Data cable can be purchased from our eBay and Amazon stores. We also have a Serial Data Cable available for anyone who needs this type of data cable.

The Current Cost monitor is designed to highlight wastage and is not intended to be a revenue meter. The reason a cost is on there is to offer some relevancy to the wattage used. The best currency to highlight wastage is energy (expressed as watts) although money ultimately saved is an obvious benefit. A good solution, offered by a user is: Add the two tariffs together, then add five per cent VAT, finally divide by two, and enter this value in as a single tariff.

More information Useful links

Logo I Logo II Logo III  Logo V Logo VI

Powered ByProject installations and management.


Contact information:

25, Athinon Ave, 2643 Ergates Industrial Area

Tel: +357 22 621 194    Fax:+357 22 621 031

Log In or Register